FX Pro seemingly not trading

[JacksonHR]

I installed GalileoFX Pro 4 days ago and left it running all week and it is seemingly not trading. I've copied the settings from the homepage, so they are theoretically well vetted and should be working. The main GalileoFX web page shows that the "Cosmic velocity pivot", "Galactic Range voyager", and "Steady orbit strike" have all made trades in this time. Attached at photos of my settings showing what I have enabled.

I have
- Ensured algo trading is enabled
- Checked all the boxes within MT5
- Set the ticker timing to the required timeframe IE: M30, H4
- confirmed that my connection to a broker is working by making manual trades.

In my journal there is 1 error where it looks like GaliloFX tried to execute a buy, but I don't understand why it failed:
2025.01.22 21:02:05.492 Trades '100059090': failed market buy 1 GBPAUD sl: 1.96214 tp: 1.96274 [Invalid stops]

Any idea why no trading is happening? Any help would be greatly appreciated!

 

[Joeboy]

I installed GalileoFX Pro 4 days ago and left it running all week and it is seemingly not trading. I've copied the settings from the homepage, so they are theoretically well vetted and should be working. The main GalileoFX web page shows that the "Cosmic velocity pivot", "Galactic Range voyager", and "Steady orbit strike" have all made trades in this time. Attached at photos of my settings showing what I have enabled.

I have
- Ensured algo trading is enabled
- Checked all the boxes within MT5
- Set the ticker timing to the required timeframe IE: M30, H4
- confirmed that my connection to a broker is working by making manual trades.

In my journal there is 1 error where it looks like GaliloFX tried to execute a buy, but I don't understand why it failed:
2025.01.22 21:02:05.492 Trades '100059090': failed market buy 1 GBPAUD sl: 1.96214 tp: 1.96274 [Invalid stops]

Any idea why no trading is happening? Any help would be greatly appreciated!

If the input bullish and bearish signal doesn't trigger , it won't execute a trade

Also feel free to check this thread:

J

Thread 'Here are some common reasons why Galileo FX might not initiate a trade:'

Aug 20, 2024

1. Market Conditions Not Met: Galileo FX follows specific market conditions and parameters to execute trades. If those conditions are not met, the robot will not initiate a trade. For example, if the required consecutive signals for entry are not present, no trade will be triggered.
2. Insufficient Funds: If your account balance is too low to open a new position based on the set lot size, Galileo FX may refrain from initiating a trade.
3. Max Orders Limit Reached: If you have set a maximum number of open orders, and that limit has been reached, the robot will not...

• Joeboy
• Replies: 9
• Forum: Technical Support

• 

 

[JacksonHR]

If the input bullish and bearish signal doesn't trigger , it won't execute a trade

Also feel free to check this thread:

J

Thread 'Here are some common reasons why Galileo FX might not initiate a trade:'

Aug 20, 2024

1. Market Conditions Not Met: Galileo FX follows specific market conditions and parameters to execute trades. If those conditions are not met, the robot will not initiate a trade. For example, if the required consecutive signals for entry are not present, no trade will be triggered.
2. Insufficient Funds: If your account balance is too low to open a new position based on the set lot size, Galileo FX may refrain from initiating a trade.
3. Max Orders Limit Reached: If you have set a maximum number of open orders, and that limit has been reached, the robot will not...

• Joeboy
• Replies: 9
• Forum: Technical Support

• 

Joeboy,

thank you for your reply. Can you help me diagnose my specific issue? I read through the thread you linked, and those issues don't seem to explain why the bot isn't making any trades.

1. Market Conditions Not Met: Unlikely - According to the trade settings I copied from the GFX Performance page, my bot should be trading. I see that each strategy is executing multiple trades per day
2. Insufficient Funds: Unlikely - The lot sizes for all 3 of my bots are set to dynamic (0.0). Should I change this?
3. Max Orders Limit Reached: Impossible - I do not have ANY open orders
4. Risk Management Settings: Unlikely - I copied the settings from the GFX performance page, so they should be configured in a way that works
5. Platform Issues: Impossible - I monitor my connection multiple times a day, and my log confirms that the connection never dropped
6. Configuration Errors: Possible - I may have it configured incorrectly. Is there a way to validate or confirm that I set up everything properly?
7. Broker Limitations: Impossible - My broker has no limits, and I have placed successful manual trades.

What seems most likely to me is that I configured the bot wrong somehow. Is there a method for me to test and confirm if it is configured properly?

 

[Joeboy]

Yeah you can try configurations on a demo first. Can you also send a screenshot of your Metatrader here? so we can check

 

[JacksonHR]

Yeah you can try configurations on a demo first. Can you also send a screenshot of your Metatrader here? so we can check

Sounds good,

Yes I can definitely post some MT5 screenshots. What would you like to see?

Also, what are some good test settings to try on a demo account?

 

[Joeboy]

I would like to see what bullish and bearish signal you were using and what time frame. You can try settings on the performance page or the one Sanchay post every week for the settings .

 

[JacksonHR]

I would like to see what bullish and bearish signal you were using and what time frame. You can try settings on the performance page or the one Sanchay post every week for the settings .

Thank you for the pointer - I will take a look at the weekly post.

Here are a few screenshots showing the settings for the 3 charts I am running.